RAND Machine - Adjustable Cable Guides and Deflector Pulley Assemblies

Adjustable Cable Guides & Deflector Pulley Assemblies

Adjustable Cable Guides
•	Rugged, economical stock units, with or without stands
•	Fabricated steel construction, durable UHMW-PE rollers, ball bearing-mounted
•	UHMW-PE rollers won't mar product, yet hold up to heavy abuse
•	Hardened steel or ceramic-coated rollers are also available
•	Ideal for ferrous and nonferrous rod, wire and strip, as well as insulated cable

All units can be mounted on our two-way adjustable stand. The stand features vertical adjustment from 36" to 48" wire line with 360° rotational adjustment. Hand-operated clamping action won't mar shaft. Made in the U.S.A. $385 each.


	Adjustable Box Roller – Model ABR-225 Accommodates products up to 2-1/4" diameter. Simple pin or optional hand knobs to loosen and tighten rollers. Model ABR-225: $435 Model ABR-225S with hardened steel rollers: $700 * Stand not included with either ABR-225 or ABR-225S

	Easy-Adjust Box Roller – Model EBR-400 Accommodates products up to 4" in diameter. Each crank moves both rollers at once, keeping product centered. Model EBR-400: $1100 Model EBR-400S with hardened steel rollers: $1425 * Stand not included with either EBR-400 or EBR-400S

	Fixed Box Roller – Model BRF-100 Accommodates products up to 1-1/2" in diameter. Mounts directly on machine entrance. $390 as shown. Fixed Box Rollers with hardened steel rollers: Model BRF-050S, for products up to 1/2" in diameter: $290 Model BRF-100S, for products up to 1" in diameter: $380 Model BRF-150S, for products up to 1 1/2" in diameter: $655

	Fixed V Roller – Model FVR-100 Accommodates products up to 4" in diameter. Model FVR-400: $355 Model FVR-400S with hardened steel rollers: $490 * Stand not included with either FVR-400 or FVR-400S

	Replacement Rollers 2R6-UHMW: 2" OD x 6" long with 3/4" bearings: $45 each For EBR-400, SBR400, FVR400 2R6-STEEL: 2" OD x 6" long with 3/4" bearings: $105 each For EBR-400S, SBR400S, FVR400S

Deflector Pulley Assemblies

The RAND Deflector Pulley Assembly is used to direct the flow of linear products in a production or warehouse environment. The pulley is adjustable vertically and angularly for the ultimate in flexibility.

Use the RAND Deflector Pulley to change the direction of your wire line, or to support the wire over long lengths. With its infinite range of adjustment, you can change the pass line height or turn it up or down.

This stand can be mounted to the floor, walls or even ceilings.

[top of page]